Job Description

SUMMARY OF RESPONSIBILITIES
Must be able to perform all associated duties and operate all converting equipment including, but not limited to, the following in a proficient manner to produce products which meet specifications:

- G&A High speed slitter
- Rewind slitters
- Roll lathe slitters
- Laminators
- Corecutters
- Doctor machine
- Perforators
- Specialty slitters

ESSENTIAL RESPONSIBILITIES OF THE JOB
Some of the general and specific duties included are as follows:
-    Check schedule to determine product to be converted.
-    Check with supervisor to resolve any questions regarding schedule, material or quality,
     communicate with prior and following shift machine operator to insure continuity of any work
     in progress.
-    Set up machines for knives, cut width, etc., and insure all machine settings are correct and that
     the machine is fully operational, including all safety equipment in place.
-    Obtain and cut cores as required and obtain all necessary packaging as required, operate core
     imprinter.
-    Install jumbo roll, log, etc., in machine and thread up machine, if necessary, according to
     proper threading for material being run.  In some cases, this includes removal of the unwind
     shaft.
-    Monitor process for any defect in specifications, stop machine as necessary to remove and
     defective product, splice material and continue.
-    Make all unwind splices according to specifications.
-    Upon roll completion, cut off product using the proper cutting tools and roll change
     techniques, including improvements in process made over the course of time, which improve
     operating proficiency and throughput.
-    Utilize overhead hoists, roll tilt tables, take off tables, etc., as required to minimize lifting
     impact.
-    Change source rolls when necessary.
-    Pack rolls in the converting machine when necessary.
-    Maintain optimum cleanliness of machine and work area, and report any machine or process
     deficiencies to supervisor, including maintenance required, safety, etc.
-    Other work assigned from time to time by the supervisor.

The above description is not set for the purpose of limiting the assignment of work.  The statements reflect some general and specific details necessary to describe the job and shall not be construed to be a complete list of the many duties performed.

Other Requirements
-    Drug Test